Official Luthiers Forum!

I check our sponsors and unless I missed it I see no single black fiber lines .010 thick.
Thanks

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com

Lance, its not technically black fiber, but it may work...I found this source for fish paper. They sell it in various thicknesses (.010 being one). Fish Paper Vulcanized Fiber

$35 for a sheet may be more than you want to spend, but a 2'x3' sheet will make a lot of purfling lines.

_________________
Joe Breault
Merrimack, NH
Perpetual novice

Lance,

I think BobC has 10 thou in stock and is expecting 20 thou soon, have a look on the home page of his site.

There ya go

Cheers

Kimlarkim39050.4463541667

Lance I have lot's of it. Let me know what you need.

_________________
Beautiful and unusual tone woods at a reasonable price.
http://www.rctonewoods.com/RCT_Store
The Zootman
1109 Military Rd.
Kenmore, NY 14217
(716) 874-1498

Glad that Bob has it, I only have .020 and .030.

Shane

_________________
Canada

Does anyone have it pre-cut in strips like StewMac? I see where most have sheets and precision cutting this thin stuff is pretty tough.

Mike

Mike, I think both Bob and I, at least, have purfling lines pre-cut into thin strips. But I do also carry double length binding height purfs to place on the side of the binding channel rather than cutting a seperate purf channel, if you get want I mean. But I do have white, black, b/w/b, b/w/b/w, maple and pearwood in small purf size pieces, like .020 to .030 x .060 x 34.5 inches

Hope that helps!

Shane

_________________
Canada

Gurian has almost anything you can think of in the purfling/binding arena. He has a $200 minimum, but if you want to build up a "stock" design for your main (spec)instruments, then buy individual "stock" for the "custom" builds, the minimum gets met pretty quickly.
Check out the web site at:

http://www.gurianinstruments.com/index.php

_________________
Hank Mauel